Synthetic grass has many advantages over the natural one "offered" by mother nature; it does not need any fertilizer or other specific attention to maintain a lush appearance. It remains in perfect condition throughout the seasons and it is not necessary to cut it when summer arrives. It is also extremely easy to clean; you can carry out regular maintenance and it is very easy to remove specific stains due to liquid spills.
Steps
Method 1 of 3: Regular Cleaning
Step 1. Use a leaf blower to get rid of the dirt
Whether it's falling leaves in the fall, branches after a thunderstorm, or other dirt that has built up, this tool is perfect for cleaning turf quickly. Define a corner of the garden to start from and start blowing away any traces of dirt or other residues; once the dirt is grouped in a confined area, you can collect it and eliminate it. It is sufficient to walk the entire lawn one more time to completely free it from larger elements.
Step 2. Rinse the grass with a garden hose
Although the blower is effective in eliminating larger residues, it cannot completely remove dirt or liquids; for this you can use a garden hose and rinse the whole lawn. Proceed with caution; do not hold the water flow at excessive pressure, otherwise you could damage the grass. Start at one end of the garden and work your way across the lawn, moving the hose in a circular path.
Step 3. Brush the grass using a broom or rake
By frequently performing this treatment, the grass stalks remain facing upwards and the lawn takes on a more natural appearance. You can use a brush, as long as it has soft bristles, but it is better to choose a broom or rake; the long handle makes it possible to treat the whole lawn in a quicker and easier way. Start in a corner of the garden and move horizontally as you sweep. When you have reached the opposite side, take a few steps back and move in the other direction.
You should always brush in the same direction, "against the grain" with respect to the stems
Method 2 of 3: Remove Stains and Traces of Liquids
Step 1. Blot liquids with kitchen paper
Blotting paper should be sufficient to solve most of these problems, but you need to be careful not to scrub to prevent the substance from getting into the artificial turf. Just pat gently; you shouldn't have much difficulty, as long as you act promptly.
Step 2. Remove any stains with a granular soap and water solution
Add a teaspoon of water to 300g of powder detergent in a container that you can easily carry; in this case, the bucket is the best solution. You can use a sponge or soft cloth to scrub until the stain is removed.
- Once the grime has loosened, rinse off the soap with the garden hose.
- This gentle solution does not harm the herb and is effective on many substances such as coffee, alcohol or ice cream.
Step 3. Scrape off any sticky or pasty residue with a knife
If you have to clean up chewing gum, lipstick, crayon or paint, you need to use some force. Gently scrape the grass, taking care not to cut it by mistake; follow the direction of the stem, from bottom to top instead of the other way around.
Step 4. Use white spirit to remove traces of solid waste
Wet a cloth with the thinner and scrub the dirty grass blades. Be careful when using this substance, make sure it does not reach the mat under the grass, as it could cause serious damage.
- Wear gloves because white spirit irritates your skin.
- Use a respirator, as the diluent vapors are toxic.
Method 3 of 3: Keep Synthetic Weed in Good Condition
Step 1. Make an equal parts vinegar and water solution to kill bacteria
Synthetic grass is much less likely to become contaminated with bacterial spores than natural grass; however, it is always possible, especially if you have pets. When you only need to clean a specific spot, use a spray bottle. If you are concerned that the contaminated area is greater, connect a sprayer with reservoir to the end of the garden hose and treat the entire lawn.
A reservoir sprayer looks like a plastic bottle with a spray nozzle; typically, it screws onto the garden hose to spread fertilizers
Step 2. Wash and brush your lawn once a week
Always use the garden hose to wet the surface; by doing so, you give it a fresh look, while getting rid of bad smells and dirt. Afterward, use a broom or rake to sweep the grass and point the stems upward giving them a more lush look.
Step 3. Avoid stepping on synthetic turf during the winter
Snow and ice cannot ruin it, but excessive trampling can turn the snow into a layer of ice. If this happens, resist the temptation to remove it, otherwise you can damage the blades of grass; just wait for it to dissolve naturally.
Don't use salt to melt snow or ice; salty residues damage the back of the turf and prevent proper water drainage
Advice
- If there are weeds among the artificial grass blades, use a weed killer that is safe for artificial turf.
- You can remove animal droppings just like you would on natural grass.
