When renovations are carried out, especially when there are several demolition works, there are also several inconveniences. One of the worst inconveniences is the amount of dust and rubble to manage. Dust settles easily throughout the home creating a thick layer on furniture, floors and personal items. To save yourself the hassle of cleaning up after construction work, you can put the tips in this article into practice for containing dust.
Steps
Step 1. Close as many doors as possible during construction
This is the quickest and easiest way to retain dust on the "construction site". All rooms that are not used by the workers should remain closed constantly, including the bathroom. This simple trick is very effective in preventing the spread of dust and residues.
Step 2. Hang plastic sheets around the work area
By covering the area under construction in this way, you can control the spread of dust; the drapes are widely available at paint shops and DIY centers at an affordable price. You can hang them with duct tape or with inconspicuous clips such as staples; Consider making vertical cuts to allow people to pass.
Step 3. Force the powder out by creating a pressure difference
The best way to proceed is to open a window and turn on a fan facing it; in doing so, the particles are pushed out of the room and do not invade the other areas of the house thanks to the pressure difference.
Step 4. Protect floors with tarpaulin or plastic
One of the surfaces that is damaged the most by construction dust is the flooring itself. The parquet finish is damaged by excess particulate matter and the latter can penetrate deep into the carpet fibers, from which it is difficult to remove. Prevent this from happening by laying sturdy tarpaulins on all busy floors during renovations.
Step 5. Use water-cooled or vacuum-equipped tools whenever possible
Some construction works produce large amounts of dust, such as cutting wood, tiles or grinding surfaces. To limit the discomfort, tools are made equipped with a vacuum cleaner and collection bag or a water cooling system. Tile saws should always be used with the water pump on which is capable of removing particles. Circular, bench saws and hand grinders should have a collection bag that minimizes airborne dust.
Step 6. Turn off the heating and cooling systems that circulate air throughout the house through ducts
If your home is equipped with these systems, turn them off during the restoration work as much as possible; otherwise, they stir up the dust and spread it throughout the rooms (nullifying the work of closing the doors and hanging the plastic sheets). Turn off the air conditioner and heating system, and consider applying paper or plastic to the vents in the ducts.
Step 7. Do most of the outdoor work consistent with construction needs
For example, tiles and wood can be cut in the open air using an electric jigsaw. Proceeding in this way and bringing the already modeled pieces into the house you can drastically reduce the amount of dust generated inside.
