How to Use a Silicone Gun: 8 Steps

Table of contents:

How to Use a Silicone Gun: 8 Steps
How to Use a Silicone Gun: 8 Steps
Anonim

A silicone gun can help if there is a need to seal cracks in windows, in the bathtub or in other areas with interstices inside the house. It can be frustrating if you don't know exactly how to use the gun. On the other hand, it is easier and more convenient if you already know how to do it.

Steps

Method 1 of 2: Insert the Silicone Tube into the Gun

Step 1. Locate the release mechanism on the back of the gun

Press it with your thumb.

Step 2. Pull the plunger back

Step 3. Insert the silicone tube into the gun

Make sure that the nozzle is in the front of the gun.

Step 4. Push the plunger back into place

Method 2 of 2: Use the silicone gun where needed

Step 1. Create a hole in the nozzle of the size you need

Step 2. With the help of a pin, make a hole in the seal

Use a Caulking Gun Step 7
Use a Caulking Gun Step 7

Step 3. Hold the gun over the gap you intend to seal

Try to keep an angle of 45 degrees.

Step 4. Pull the trigger as you move the gun along the gap you are sealing

Once you are no longer able to pull the trigger, release it and start over.

Advice

  • The speed with which you move the gun while pulling the trigger will determine the amount of silicone dispensed; the faster you pull the trigger, the greater the amount released.
  • You can smear the silicone with your finger if you have applied too much of it in a specific place.

Recommended: