How to Remove the Anti-Theft Bolts: 6 Steps

Table of contents:

How to Remove the Anti-Theft Bolts: 6 Steps
How to Remove the Anti-Theft Bolts: 6 Steps
Anonim

Have you lost the key to the anti-theft bolts? This article explains how to disassemble this type of bolts without the appropriate wrench and thus avoid an expensive intervention of the tow truck.

Steps

Remove Locking Lug Nuts Step 1
Remove Locking Lug Nuts Step 1

Step 1. Make sure the key is not in the glove box, on the dashboard, in the trunk or even under the seats

It may also be located under the spare tire.

Remove Locking Lug Nuts Step 2
Remove Locking Lug Nuts Step 2

Step 2. Take the set of sockets and locate the one that fits the safety bolt head

12-sided compasses offer better results. There are also some special ones designed to remove the anti-theft bolts.

Remove Locking Lug Nuts Step 3
Remove Locking Lug Nuts Step 3

Step 3. Choose the sleeve one size smaller and put it on the head of the bolt

Remove Locking Lug Nuts Step 4
Remove Locking Lug Nuts Step 4

Step 4. Snap it onto the bolt by hitting it with a mallet

Remove Locking Lug Nuts Step 5
Remove Locking Lug Nuts Step 5

Step 5. When the compass is firmly attached to the bolt, use the specific wrench to rotate and loosen it

Remove Locking Lug Nuts Step 6
Remove Locking Lug Nuts Step 6

Step 6. Repeat the process if necessary

Advice

  • Make sure you don't hit the wheel rim.
  • If you have an original car manufacturer-installed safety bolt, call your dealer for a key. Ask if they have a genuine set of safety bolts so you can order the correct one. In case it was an aftermarket bolt, you need to find a way to take it apart.

Recommended: