How to use a professional floor polisher

Table of contents:

How to use a professional floor polisher
How to use a professional floor polisher
Anonim

The professional floor polisher is an electric, vertical tool similar to a vacuum cleaner in shape and size. It is used to clean and polish hard floors (not covered with carpet). Professional models are used in hospitals, schools and companies, because they do a quick and accurate job by washing and polishing large surfaces. They offer excellent results thanks to the pads that rotate at more than 2000 revolutions per minute, generating heat by friction which in turn makes the floor shiny. Polishers, especially professional ones, are complex to use; follow the instructions in this article to learn how to use one.

Steps

Use a High Speed Floor Buffer Step 1
Use a High Speed Floor Buffer Step 1

Step 1. Move furniture and other objects off the floor

Place the chairs on top of the tables and bring them close to the edges of the room; if possible, empty the room completely by putting everything in the hall or in another room. Polishers can remove liquids and some dirt, but larger debris should be hand-picked before starting work

Use a High Speed Floor Buffer Step 2
Use a High Speed Floor Buffer Step 2

Step 2. Check the brush or polishing pad to make sure they are clean

  • If the pad is dirty or worn, replace it; if you use a dirty one, you can scratch the floor, especially when you run the machine at full speed.
  • Inspect it for defects, missing portions or irregularities in the fabric.
Use a High Speed Floor Buffer Step 3
Use a High Speed Floor Buffer Step 3

Step 3. Start from one corner of the room

  • Identify the corner furthest from the entrance to the room you want to polish, to avoid treading on the surface just treated during the work; if you walk on the freshly polished floor, you can dent it or scrape it.
  • Make sure there is an electrical outlet nearby and that the polisher cable is long enough to allow you to move around the room; if not, organize a "path" that allows you to insert the plug into various sockets without having to step on the treated surface.
Use a High Speed Floor Buffer Step 4
Use a High Speed Floor Buffer Step 4

Step 4. Apply an abrasive liquid or cream polish to the pad or directly to the floor

Use a High Speed Floor Buffer Step 5
Use a High Speed Floor Buffer Step 5

Step 5. Turn on the machine

  • Locate the power switch which is typically located near other control buttons on the handle of the appliance; if you encounter difficulties, consult the user manual.
  • Choose the correct setting for the type of floor and dirt; some professional polishers have different functions that allow you to choose various rotation speeds.
Use a High Speed Floor Buffer Step 6
Use a High Speed Floor Buffer Step 6

Step 6. Walk slowly backwards, moving the machine back and forth across the room

  • Move sideways starting from the right; proceed slowly and carefully. Then change direction by moving the machine from left to right to ensure even polish.
  • Overlap each pass with the previous one about 1/3 of its width as you work, so you don't miss any areas.
Use a High Speed Floor Buffer Step 7
Use a High Speed Floor Buffer Step 7

Step 7. Examine the swab a couple of times during the process

See if it is torn, if large residues of dirt have accumulated or if it is too dirty; in these cases you have to replace it

Advice

  • Professional polishers can be used on all hard surfaces not covered with carpet.
  • There are two main types of pads: abrasive and polishing ones. The former are suitable for cleaning heavily soiled floors, as they are more aggressive; the latter are perfect for finishing the job and making the surface shiny after cleaning.
  • You can purchase replacement pads from the machinery manufacturer's website or by calling the customer service of the same; you can also find them at hardware stores and ceramic centers.
  • Use only the necessary amount of abrasive liquid or cream polish; if you overdo it, you have more difficulty giving the floor a uniform appearance.

Recommended:

4 Ways to Clean Floor Grouts

4 Ways to Clean Floor Grouts

Even after washing it, the floor with dirty joints looks bad. You can restore it to its original splendor by cleaning the spaces between the tiles. Depending on the type of coating and the grout color of the joints, there are several effective cleaning methods to make the floor really clean.

3 Ways to Handle Noisy Neighbors on the Upper Floor

3 Ways to Handle Noisy Neighbors on the Upper Floor

One of the hardest aspects of living in a downstairs apartment is dealing with the noise coming from upstairs neighbors. Whether it's the noise of normal daily activities, like walking or talking, or partying at night on the weekend, the first thing to do is try talking to your neighbors.

3 Ways to Eliminate Wax Accumulations from the Floor

3 Ways to Eliminate Wax Accumulations from the Floor

As vinyl and linoleum floors wear out over the years, the wax helps to maintain their luster and protect them from further wear, damage and scratches. You can also use it on wood, tile and epoxy resin ones. However, bear in mind that over time it tends to build up and take on a yellowish tint.

How to Learn to Read Floor Plans: 7 Steps

How to Learn to Read Floor Plans: 7 Steps

Floor plans are two-dimensional drawings of an architectural project that indicate the size of a designed building, the materials that must be used during construction and the definition of its characteristics. Architects use blueprints and written directions to communicate to workers and builders how the building is to be built.

How to Tile a Floor: 9 Steps

How to Tile a Floor: 9 Steps

Tiles are used to cover a surface indoors or outdoors, creating a more comfortable environment. Steps Step 1. Prepare the surface Use an acid cleaner of your choice to clean, then let it dry completely. Examine the floor and check for cracks that need grouting before proceeding.