How to Make a CD Case with a Sheet of Paper

Table of contents:

How to Make a CD Case with a Sheet of Paper
How to Make a CD Case with a Sheet of Paper
Anonim

Nowadays, a lot of people buy CDs without a case, because they are extremely cheap. Here's how to make a CD case out of a sheet of paper!

Steps

Method 1 of 2: Adhesive-free

Make a CD Sleeve from Paper Step 1
Make a CD Sleeve from Paper Step 1

Step 1. Fold some writing paper or A4 sheet horizontally, leaving a 2.5cm wide edge to overlap

Make a CD Sleeve from Paper Step 2
Make a CD Sleeve from Paper Step 2

Step 2. Fold two 4.5cm wide strips inward on each side

If you don't have a ruler handy, put the CD in the center and try to fold the two sides so they are the same size.

Make a CD Sleeve from Paper Step 3
Make a CD Sleeve from Paper Step 3

Step 3. Open the sheet completely and fold the two vertical strips on the sides firmly

Make a CD Sleeve from Paper Step 4
Make a CD Sleeve from Paper Step 4

Step 4. Slide the CD into the longer pocket, sliding it under the vertical strips folded on the sides

Make a CD Sleeve from Paper Step 5
Make a CD Sleeve from Paper Step 5

Step 5. Fold the sheet horizontally

Make a CD Sleeve from Paper Step 6
Make a CD Sleeve from Paper Step 6

Step 6. Fold the edge over 2.5 centimeters, overlapping it to create a perfect square

Make a CD Sleeve from Paper Step 7
Make a CD Sleeve from Paper Step 7

Step 7. Slip the overlap part inside the pocket

Make a CD Sleeve from Paper Step 8
Make a CD Sleeve from Paper Step 8

Step 8. Flatten the case

Method 2 of 2: With an Adhesive Product

Make a CD Sleeve from Paper Step 9
Make a CD Sleeve from Paper Step 9

Step 1. Fold the vertical sides of an A4 sheet inward, making sure they are 3.8 centimeters wide each

Make a CD Sleeve from Paper Step 10
Make a CD Sleeve from Paper Step 10

Step 2. Rotate the sheet so that the folded strips are horizontal, then fold one side of the sheet so that it is 12.7 centimeters wide

Make a CD Sleeve from Paper Step 11
Make a CD Sleeve from Paper Step 11

Step 3. Use some glue or double-sided tape to close the sheet to create a pocket

You could also fold the sheet around the CD, trying to recreate a square bag; then, pin the sheet in the center, avoiding inserting it into the CD

Make a CD Sleeve from Paper Step 12
Make a CD Sleeve from Paper Step 12

Step 4. Refold the remaining edge

You now also have a flap to close the case.

Make a CD Sleeve from Paper Step 13
Make a CD Sleeve from Paper Step 13

Step 5. Finished

Advice

  • You can print a 12cm image on the top of the sheet to match the front of the case. You can also take advantage of the back, but make sure you leave 2 inches at the bottom, as that stripe will go inside the pouch and will no longer be visible after closing the case. Remember to decorate the sheet before folding it!
  • On the back of the case you can write all the titles of the songs on the CD.
  • If you created the CD using an iTunes playlist, you can click File> Print> CD Booklet and then, from the list, select the Single Side (black and white) option. In this way, you will have the possibility to print the names of the artists and the titles of the songs present in the playlist, centering the exact point to create the case.
  • If you want it to be stronger, use cardstock instead of a simple sheet of paper. However, it will be a little more difficult to fold.
  • To avoid scratching the CD, you could put a paper tissue inside the case; however, being a derivative of wood, you would risk scratching it in any case. It would be better to use a piece of cloth to protect the CD.
  • If you have trouble folding and inserting the top, try cutting the edges by a few millimeters.
  • If you decide to use glue, make sure it is completely dry before inserting the CD into the case.
  • It's not ideal for transport, but it's good enough to protect CDs you leave in the car or take to school. This type of case is perfect for CDs you burn yourself.
  • Handle CDs carefully so as not to scratch them.

Recommended: