How to Build a Beer Pong Table: 12 Steps

Table of contents:

How to Build a Beer Pong Table: 12 Steps
How to Build a Beer Pong Table: 12 Steps
Anonim

It is strongly recommended that in the construction of the beer pong table, we refrain from consuming alcohol, especially in the use of household appliances and sharp objects.

Steps

Make a Beer Pong Table Step 1
Make a Beer Pong Table Step 1

Step 1. Place the plywood on the table and mark the dimensions with a pencil

Cut the plywood to make it fit the table. Secure the plywood to the table with clamps. Use sandpaper to smooth the edges.

Make a Beer Pong Table Step 2
Make a Beer Pong Table Step 2

Step 2. Pierce the center of a glass with a nail and enlarge the hole so that the pencil can make a mark through the glass

Make a Beer Pong Table Step 3
Make a Beer Pong Table Step 3

Step 3. Use the ruler to find the center of the table lengthwise and draw a straight line along the center with a pencil

Make a Beer Pong Table Step 4
Make a Beer Pong Table Step 4

Step 4. Place the triangle glasses where you will place them, with the tip of the triangle on the center line

Make a Beer Pong Table Step 5
Make a Beer Pong Table Step 5

Step 5. Mark the tip of the triangle by placing a glass with holes on it and marking the position on the plywood with the pencil

Do the same with the other glasses in the triangle. Measure the distance between the base of the table and the top mark with the ruler.

Make a Beer Pong Table Step 6
Make a Beer Pong Table Step 6

Step 6. Repeat the previous step at the same distance on the opposite side of the table

Make a Beer Pong Table Step 7
Make a Beer Pong Table Step 7

Step 7. Calculate the base radius of the disposable cups you will use

Use a drill bit slightly larger than the radius of the glass. Remove the clamps from the plywood and move it to the ground so as not to mark the table. Put the clamps back in place and drill the wood in the marked points (it is recommended to get help to hold the wood).

  • Make a hole on the right of the triangle for the glass of water. The location is not important, as long as it is far enough away to blend in with the gaming glasses.

    Make a Beer Pong Table Step 7Bullet1
    Make a Beer Pong Table Step 7Bullet1
  • Put the clamps back on the plywood to secure it to the table and use the sandpaper to smooth the corners.

    Make a Beer Pong Table Step 7Bullet2
    Make a Beer Pong Table Step 7Bullet2
Make a Beer Pong Table Step 8
Make a Beer Pong Table Step 8

Step 8. Repeat the previous step on the opposite side of the table

With the drill, try to mirror the other side.

Make a Beer Pong Table Step 9
Make a Beer Pong Table Step 9

Step 9. Lay the plywood on something that can be smudged and paint on the wood

Make a Beer Pong Table Step 10
Make a Beer Pong Table Step 10

Step 10. Wait for the marks to dry and then re-attach the plywood to the table

Make a Beer Pong Table Step 11
Make a Beer Pong Table Step 11

Step 11. Nail the plywood

Paint the nails to hide them.

Make a Beer Pong Table Step 12
Make a Beer Pong Table Step 12

Step 12. Finish the plywood with polish

Let it dry and then apply a second coat that will protect your drawing from beer splashes.

Advice

Designing the table is the best part, be creative

Warnings

  • The consumption of alcoholic beverages is illegal under 18 years of age.
  • Driving while intoxicated is illegal.
  • Alcohol consumption should be done with certain precautions, for example a designated driver.
  • Alcohol abuse should be avoided.
  • Alcohol during pregnancy increases the risk of disease for the newborn.

Recommended: