If you want to learn how to draw an anchor, follow the steps in this article.
Steps
Step 1. Draw a ring
To do this, start with a circle. Then draw a smaller one inside the first one. At the lowest point of the innermost circle, draw a small trapezoid.
Step 2. Draw a thick cross under the outermost circle
Step 3. Spread both ends of the crossbar
Also slightly widen the lower half of the vertical bar of the cross. The vertical part of the cross will be the spindle of the anchor, while the log will be the horizontal part.
Step 4. Draw a crescent on the bottom of the cross:
it must be slightly wider than the width of the crossbar.
Step 5. In the center of the crescent, draw a triangle with the tip facing down
This will be the diamond. On each end of the crescent add a triangle that points outwards: it will be the flaps.
