If you do not properly secure your motorcycle to the trailer or van, it could fall onto the road while you are traveling. To make sure you have done a job to perfection, use an effective anchoring procedure so that it does not move from the trailer. Follow these instructions.
Steps
Step 1. Put a wheel stop in the front of the trailer / van
It is a wedge made of metal or other strong material that blocks the front wheel of the motorcycle and prevents any movement.
Step 2. Load the motorcycle into the van / trailer
Use a ramp, or get someone to help you lift it up to the loading floor.
Step 3. Push the front wheel into the retainer
Step 4. Wrap some soft rings at the base of the handlebar, one on the right and the other on the left
This loops prevent the ratchet straps from scratching the bike.
Step 5. Hook one end of the ratchet straps to the soft loops
These are specific bands created specifically to be stretched and ensure perfect fixing.
Step 6. Attach the other end of the straps to secure points on the van / trailer
Step 7. Tighten the straps
Open the buckles and pull the fastening tab. Repeat the process for each strap. Each of them must be so tense that the bike can stand on its own.
Step 8. Locate stable components in the rear of the bike frame
Every motorcycle is different, so use your judgment to evaluate safe anchorage points.
Step 9. Wrap the soft loops around your chosen points
Step 10. Connect the ratchet straps
One end will attach to the soft rings, and the other to the van / trailer anchor points.
Step 11. Tighten the straps
Loosen the buckle and pull the tab to the desired tension.
Step 12. Double check all straps
Make sure none have loosened or moved during the fastening process.
Advice
- To ensure a good fit, use ratchet straps with a sturdy metal notched buckle.
- Check the straps regularly. If you have to go on a long journey, stop often and get out of the car / van to check and fix the position of the motorcycle. Check that the straps have not loosened or moved from their seat.
- Once you have secured the bike, get on the trailer or the van body and jump to simulate the irregularities of the asphalt. In this way you can understand if the bike is well anchored and if it is necessary to make changes to the tension of the belts.
- Get someone to help you hold the bike while you tie it up.