This article explains how to connect two Bluetooth audio speakers to a Samsung Galaxy device. The new smartphones and tablets of the Samsung Galaxy line allow you to connect two Bluetooth audio speakers and use them simultaneously to play multimedia content.
Steps
Step 1. Activate pairing mode on both Bluetooth speakers
The procedure to follow to activate pairing mode varies depending on the Bluetooth device you are using. Normally there is a button which, if held down for a specific time, allows you to activate the pairing mode. Consult the instruction manual of the device or refer to the manufacturer's website to find out how to activate the pairing mode of your two Bluetooth audio speakers.
Step 2. Swipe your finger across the Samsung Galaxy screen from the top edge
Turn on your device if you haven't done so already, then unlock the screen and slide your finger down on the screen, starting from the top, to bring up the notification bar and quick settings panel.
Step 3. Press and hold the "Bluetooth" icon
The latter is characterized by the stylized letter "B", preceded by the ">" symbol. Press and hold your finger on the Bluetooth connectivity icon to be redirected to the configuration settings menu.
If the "Bluetooth" icon is not visible, slide your finger down the screen from the top again to view the Quick Settings panel in its entirety
Step 4. Activate the "Bluetooth" slider
If Bluetooth connectivity is not already active, activate it now by sliding the corresponding slider to the right. It is located at the top of the appeared menu. The device will automatically scan for Bluetooth devices in the area.
Step 5. Select both Bluetooth audio speakers to pair
While the two Bluetooth speakers are in pairing mode, the Samsung Galaxy device will be able to detect them. When it has identified them, they will appear in the "Available devices" section. Select it to pair with the Samsung Galaxy. When connected to the Android device, they will appear in the "Paired devices" section with "Connected for calls and audio" under the name.
If the Bluetooth speakers do not appear in the list, press the button Research located at the top right of the screen to re-scan the area for active Bluetooth devices. Make sure the speakers are still in pairing mode.
Step 6. Press the ⋮ button
It features three vertically aligned dots and is located in the upper right corner of the screen. A menu will appear at the top right of the screen.
Step 7. Select the Dual Audio option
It is the first menu item that appeared. The "Dual Audio" setting list will be displayed.
Older Bluetooth speakers may not synchronize audio playback perfectly. This problem is caused by the Bluetooth firmware version installed on the device
Step 8. Activate the "Dual Audio" slider
moving it to the right.
It is located at the top of the screen. At this point, you can start playing any multimedia content and the audio signal should be played simultaneously from both Bluetooth speakers connected to the Samsung Galaxy.
