Imagine being on the first floor of a building, and having to attend a meeting in a room that is located on the 10th. You enter the elevator which stops on the third floor to let someone in and pushes the button to go to the fifth. Now before you can get to the 10th floor you will need to make one more stop, and you will be late for the meeting. If you are thinking: "If only I could skip the booked stops …", know that it is possible. Continue reading this tutorial to find out more.
Steps
Step 1. Be aware that this procedure does not work with all elevators
Some are programmed for this type of function, others are not.
Step 2. Make sure you have a good reason to use this 'Express' feature
Step 3. Press and hold the button for the required plan
Step 4. At the same time press and hold the button to close the elevator doors
Step 5. Press and hold both buttons until the elevator starts moving
Step 6. Wait to be taken directly to your destination
Advice
- Note: This tutorial is great for 'Elevator Filming' fans !!
- Note: this procedure cannot bypass any floor calls made from the pushbutton panel inside the lift. If someone inside the elevator presses another button, the elevator will also stop at the selected floor.
Warnings
- Always take into account the needs of others!
- Always use common sense before carrying out this procedure, especially when you are in large office buildings, where there are many other busy people who need to be able to use the elevator.