The eyebrows are naturally lighter in the area next to the nose, progressively darkening towards the tail. Creating a faded effect with makeup allows this feature to stand out. To get a nice shape, fill them using a subtle color. If you want a more eye-catching result, create a well-defined progressive color change from the beginning to the end of the eyebrow. This technique also helps in framing the eyes. If you want a shaded effect, outline and fill in your brows with pencils and powders of different but matching colors.
Steps
Method 1 of 3: Fill in the Eyebrows
Step 1. Wash your face and pat your eyebrows with a towel
Pass an eyebrow brush. Look at the natural shape and see if they have spots where they are sparse or uneven.
- Remove unwanted hair with tweezers or by waxing.
- If necessary, trim the upper part of the eyebrows.
Step 2. Determine the start and end point
Place a thin brush next to the nose, creating a vertical line up to the eyebrow. The eyebrow should start where the brush will fall. Then, move it at an angle of 45 ° between the nose and the outer corner of the eye. The eyebrow will have to end where the brush will fall.
Step 3. Draw short, light, vertical strokes with an eyebrow pencil
The strokes should mimic real hair. Choose a pencil that is similar in color to your eyebrows. Start drawing the strokes starting from the inner corner of the eye. Work slowly outwards, filling in the sparse spots with a light hand.
Step 4. Define your brows with pressed powder of the same color
Apply a specific brow powder or eyeshadow with the help of an angled brush to fill them in better. Use very little at the beginning of the eyebrow, gradually adding more towards the tip. To better cover them and spread the product more evenly, try moving the brush slightly back and forth. This movement also allows you to better define the arc.
- Blend the color and soften the sharp lines by wiping with an eyebrow brush.
- Try to blend the color in the initial part of the eyebrow as much as possible. To do this, remove the excess dust from the toothbrush and use it to blend the area for a subtle result.
Step 5. Cleanse your brows
Remove any residue of color left outside the contour with your fingers or a cotton swab. For defined and clean brows, apply translucent powder to the edges with a brush. You can also make them more tidy by applying a colored concealer around the perimeter with the help of a brush.
To set your makeup and keep it going all day, apply a veil of clear gel or mascara
Method 2 of 3: Create a Gradient Effect
Step 1. Before starting, make sure your brows are dry and clean
Remove unwanted hair with tweezers or by waxing. Comb them up to see their shape. Tick off the top in case there are long hairs that go beyond the contour of the eyebrows.
Step 2. Outline the lower arch with an eyebrow pencil until the desired shape is achieved
Thicken the line from the point that is the same height as the central part of the iris at the end. The tail of the eyebrow should be dark and well defined.
Step 3. Fill in sparse areas by applying brow powder or eyeshadow with an angled brush
Draw light strokes from the inner corner of the eye to the outside. The powder and the brush should also be used to even out and blend the color of the pencil. Apply larger amounts of powder to the end of the eyebrow.
To emphasize the blended effect, try using a slightly lighter powder in the inner area
Step 4. Blend the color on the initial part of the eyebrow using the toothbrush
Rock it to soften the color of this area. Then, gently swipe it all the way to the end. As you comb your eyebrow, be sure to smooth out any lumps of product.
Step 5. Clean and fix your brows
Outline the edges and bottom with the concealer using a concealer brush, then blend it. You can also use a pencil one, but make sure you blend it well. Set your brows with clear gel or mascara.
Highlight the arch further by applying a very light eyeshadow under the browbone, working up to the point where the arch of the brow begins
Method 3 of 3: Create a Shaded Effect
Step 1. Before starting, make sure your brows are clean, dry and well defined
Wash your face. Remove unwanted hair with tweezers, waxing and / or trimming it. Comb your brows upward with a toothbrush. Look for sparse spots to fill.
Step 2. Choose two colors
To get a shaded effect, you can use any combination you want. For a delicate result, choose a lighter tone and a darker one similar to the color of the eyebrows. For example, use a light brown at the beginning of the eyebrow and a deeper brown at the end. For a stark contrast, choose completely different colors.
- The colors should belong to the same family. For example, a warm brown rather than ash brown will work well with a gold.
- Choose vibrant colors to create greater visual impact. Try selecting two different tones of the same color, such as light blue and dark blue.
Step 3. Outline the outer edges of the eyebrows with a pencil that is the same color as the hair
Focus on the lower part of the arch. Draw light strokes in the center of the eye, then thicken them as you get closer to the end. Clearly define the tail of the eyebrow with the pencil.
- If you want to emphasize the bow, pin the end.
- Make sure you use a pencil that is the same color as your brows. If you fill the sparse areas with an unnatural color, you will only draw attention to the uneven parts. The bright tones should be reserved exclusively for the application of the powder.
Step 4. Apply powder products with an angled brow brush
Start with the lightest color. Draw light, vertical strokes at the beginning of the eyebrow. Using the same brush, apply the darker powder to the final part. Blend the two colors on the arc.
- Use an eyebrow brush for the purpose of blending better.
- If you're using a vibrant color that's completely different from your natural one, be sure to apply it all over your brow.
Step 5. Clean and fix the color
Define the edges of the eyebrows with a concealer and eyebrow brush or pencil concealer. Apply a light eyeshadow on the brow bone to brighten the shaded effect. Finish the procedure with a clear gel or mascara to fix the product.
