Dyeing dried roses is not an easy process, however the result can be spectacular. You will only need boiling water, some colors and some dried flowers. Read on to discover the traditional method of dyeing dried roses and a more ingenious technique: reserve dyeing on fresh roses.
Steps
Method 1 of 2: Dye the Roses One Color
Step 1. First, you need to get some dried roses, making sure they are completely dry
It is better to use white roses because it will be easier to transfer the colors to them, as if they were immaculate canvases.
Step 2. Fill a pot of water and bring it to a boil
There must be enough water to fully submerge the rose petals as it boils. Therefore, the amount needed depends on the size of the pot used.
Step 3. Add the color to the pot when the water is boiling
Some people use Rit colors, but you can use whatever you like, even food dyes. Add 8 to 15 drops of color, depending on the amount of water in the pot. Use more to make the color more intense.
Step 4. Add a pinch of salt to the water
Make sure it dissolves completely. It is used to make the color adhere better to the petals. A teaspoon of salt should be enough for a medium-sized saucepan.
Step 5. Dip the rose petals into the colored water
The warmer it is, the more intense the color on the petals will be. The colder it is, the lighter the shades obtained will be.
A wonderful, delicate and ethereal effect can be achieved by immersing the petals in cold water for a very short time. Many people prefer this type of shade, rather than solid, intense colors obtained with hot water
Step 6. Hang the flowers on a drying rack or place them on a wire rack to dry
Step 7. Finished
Method 2 of 2: Reserve Dye Applied to Roses
Step 1. Shorten the stem of the roses you want to dye
You have to cut it in half or leave only a quarter. Put each stem in a different container. To get a good result, it is better to shorten the stems, although it is not necessary to do this with all types of roses, especially if you use very tall glasses to color them.
Step 2. Cut the stem lengthwise into two parts
To get a spectacular effect, divide it into four parts. Otherwise, just cut the stem in half and you will get a satisfying result in any case.
You don't have to cut it down to the flower. Stop in the middle of the stem. In most cases it is more than enough to color the flower
Step 3. Find a suitable container to hold the color
Popsicle molds are perfect for this operation: they allow you to dye a good number of flowers at the same time. Otherwise, you can use two tall glasses or two vases for each rose.
Step 4. Pour a different color into each container
A small amount is sufficient: the lower part of the stem is enough to be immersed in the liquid.
Match the colors you like the most and that go well together, such as pink and red, or green and yellow, blue and purple, yellow and orange, green and blue
Step 5. Place each part of the stem in a different container, allowing it to absorb the colors
After about 8 hours you will begin to notice a wonderful shade on the petals. After 24 hours the petals should be a completely different color.
Step 6. Remove the roses from the containers
At this point you can give them as a gift or leave them to dry!