3 Ways to Configure a Wireless Network in Puppy Linux

Table of contents:

2024 Author: Samantha Chapman | [email protected]. Last modified: 2024-01-12 03:32

This is a guide to configuring a home wireless network (IEEE 802.11, also called WiFi) with Puppy Linux using the graphical interface.

Steps

If your router is not new, turn it on, connect it to your PC and skip to method 2 "Detecting your wireless interface".

Method 1 of 3: Set up your new router

Step 1. Connect the router to your home internet socket

Set up a Wireless Network in Puppy Linux Step 2

Step 2. Connect the router to your PC via an ethernet cable

Set up a Wireless Network in Puppy Linux Step 3

Step 3. Open your browser and type in the address "https://192.168.0.1 192.168.0.1" or "https://192.168.2.1 192.168.2.1", or "https://192.168.1.1 192.168.1.1".

Set up a Wireless Network in Puppy Linux Step 4

Step 4. Enter your username and password for the router (usually "admin" and "admin"), then your Internet Service Operator

Set up a Wireless Network in Puppy Linux Step 5

Step 5. Enable wireless and choose WPA encryption (WEP can be cracked in seconds) with AES option if available

Then enter a 64-character password.

Method 2 of 3: Detecting your GUI

Set up a Wireless Network in Puppy Linux Step 6

Step 1. Click the "Connect" icon on the desktop

Set up a Wireless Network in Puppy Linux Step 7

Step 2. In the "Connect" window, click "Connect to the internet via network card"

If a wireless card appears under "Interfaces" ("Driver Modules" in Puppy version 2), skip to the next method "Connect to a network"

Set up a Wireless Network in Puppy Linux Step 8

Step 3. Click "Upload Module", choose Automatic and click OK

If successful, you can skip to "Connecting to a network".

If your card is not detected automatically, do it manually by choosing the manufacturer and model, then click OK.
If your board is not on the list, visit the WirelessWorking website for a list of Puppy compatible boards.
If your wireless card is not on the list, choose "ndiswrapper" from the list and choose the Microsoft Windows driver (file with.inf extension) and click OK until you return to the network configuration window.

Set up a Wireless Network in Puppy Linux Step 9

Step 4. Click "Save"

Method 3 of 3: Connecting to a Network

Set up a Wireless Network in Puppy Linux Step 10

Step 1. Under "Interfaces", click on the newly detected wireless card

Set up a Wireless Network in Puppy Linux Step 11

Step 2. Click the "Wireless" button

Set up a Wireless Network in Puppy Linux Step 12

Step 3. Click the "Scan" button (it may take several attempts), choose your wireless network and click OK

Set up a Wireless Network in Puppy Linux Step 13

Step 4. Choose the encryption method (WEP or WPA) and then enter your 64-character password

Set up a Wireless Network in Puppy Linux Step 14

Step 5. Click "Use this profile"

Set up a Wireless Network in Puppy Linux Step 15

Step 6. Click "Auto DHCP" (or "Static IP" and enter an IP address if "Auto DHCP" doesn't work)

At this point you are connected.

3 Ways to View the List of Devices Connected to a Wireless Network

Do you suspect that someone has managed to gain access to your wireless network? If you want to know which devices are connected to your Wi-Fi network, then keep reading this article. There are several ways to find the information you are looking for.

How to Configure a Network in Linux Ubuntu: 6 Steps

Configuring the network settings, to use an ADSL connection useful for accessing the internet, could be a nuisance, especially when you are using an operating system different from the one for which the configuration instructions were written.

3 Ways to Make a Printer Wireless with a Wireless Router

This article shows how to turn a normal wired printer into a wireless network printer by connecting it directly to the router that manages the LAN. If your printer cannot be connected directly to the router, you can still turn it into a wireless network printer by connecting it to one of the computers on the LAN and sharing it on the network to allow all other systems to use it as a printing device.

4 Ways to Configure a Network Printer in Windows 7

Windows 7 allows you to configure a print device as a network printer in several ways. A printer can be networked directly as a standalone, standalone device, or it can be connected to a computer and shared as a network resource to be available for use by all computers that are part of the same LAN or Homegroup.

3 Ways to Configure Your Laptop for Wireless Printing

More and more printers nowadays can be connected directly to a Wi-Fi network, so printing wirelessly from a computer has become easier than ever. If you have a wireless printer that can be connected directly to your Wi-Fi network, you will be able to print quickly and easily from both PC and Mac.