The following is a procedure for setting the volume control on a mono or stereo amplifier of a car stereo system.
Steps
Set the Gain on a Car Amplifier Step 1
Step 1. Make sure you've connected everything correctly and observed the correct speaker impedance for your particular system
Set the Gain on a Car Amplifier Step 2
Step 2. Adjust the volume / gain control to ZERO on both the car stereo and amplifier before starting the procedure
Set the Gain on a Car Amplifier Step 3
Step 3. Now turn on the car stereo on a radio station or start playing a cd
At this point you won't feel anything: don't worry, it's normal. Turn the volume of the car radio to 2/3 or 3/4 by turning the appropriate knob (you will still not hear anything coming from the speakers, again this is normal as the volume on the amplifier is still at 0).
Set the Gain on a Car Amplifier Step 3Bullet1
Set the Gain on a Car Amplifier Step 4
Step 4. Now, with the volume on the car stereo set as specified above, start turning up the volume / gain on the amplifier
The volume will gradually increase: stop when you have reached the maximum volume at which you will ever want to listen to music in your car, without generating distortion and, of course, without ruining the speakers.
Set the Gain on a Car Amplifier Step 5
Step 5. Now move to the car stereo again and turn the volume down to a normal level
The procedure is over - that's all there is to it. If you later find that you have set the gain on the amplifier too high or too low, repeat the same procedure to reset it.
To make a great DJ set, you need skill, experience, talent and a sense of rhythm. By reading this article, you can learn the techniques used by the best DJs, you can learn how to choose the right structure for your sets, how to mix on the spot to make the audience dance and how to stand out from your peers.
Many cars, especially those made more than 10 years ago, have a raw and really annoying sound system to hear, paired with audio cassette players. By investing some time and a little money you can have a real mobile entertainment center in your car.
Properly installing a car amplifier is not particularly easy, but it is an important part of gaining a certain sound quality and avoiding technical accidents. This article will guide you in installing an amplifier in your car. Steps Step 1.
Often on new cars the standard audio system is, without beating about the bush, rather poor. Fortunately, the speakers available on the market are not only a relatively affordable way to improve the functionality of your car stereo, but they are also usually quite simple to install (clearly the large number of models available means that some will be more complicated to assemble than others.
Find out how to set up a simple audio diffusion system with a single microphone and two speakers in order to spread the signal as much as possible while keeping the risk of feedback to a minimum. Steps Step 1. Place the two speakers in front of the audience, one on each side Position them so that the left speaker covers the left side of the area where the audience will be seated, and the right one covers the right side.
