High electricity bills significantly affect the monthly budget of most buildings. However, lowering them requires some simple techniques and minor adjustments. This is possible, if you follow a few simple criteria to operate your appliances that certainly allow you to reduce electricity costs. You can evaluate different differences that depend on the way energy is used.
Steps
Step 1. Do an annual electrical appliance checkup
Have your main electrical appliances checked by authorized technicians. Air conditioners can consume up to half of the energy bill. They need regular maintenance. Your equipment must be restored to its maximum efficiency with the annual check-up. Replace your old electrical appliances with new ones, as they promise substantial energy savings.
Step 2. Manage the temperature through a thermostat
Get a programmable thermostat in your home that has a timer on the peripherals. By raising or lowering the temperature you can save a lot every year. Allow enough sunlight to enter the rooms by installing the best curtains.
Step 3. Turn off the power when an appliance is not in use
Sometimes when you turn off an appliance, there may still be electrical draw. Always turn off light bulbs and fans when you don't need them. For small appliances, such as battery chargers, radios, TVs, etc., connect them to a power strip when needed. You just have to flip a switch when you don't have to use them. Turn off the PC monitor when you are done with the job.
Step 4. Replace the bulbs now
A single incandescent light bulb can cost as much as 5 - 10 fluorescent light bulbs. LED lights are more attractive and give off soft lighting and save more energy. Try using high-voltage LED light bulbs that are efficient and should turn out to be great. Make sure your replacement bulbs are of the same good quality, make sure your electric timers are set to their best.
Step 5. Install timers for safety reasons
Timers help ensure that the lights turn on and off like clockwork when you're not nearby. From a safety perspective, have the timers turn on the lights randomly. This makes it difficult for thieves to do harm when you are away from your business premises. Always have the timer checked regularly to avoid malfunctions.
Step 6. Save electricity with reduced rates for off-peak hours
This depends on how your energy provider has defined the peak hours. Generally after 8 pm, the reduced rates apply until - 6 am. The electric water heater absorbs a lot of electricity in the house. You can benefit from the reduced rates by inserting a timer on the electric water heater that cuts off the power supply in the early hours of the morning. Some water heaters have sufficient insulation to keep the water at a good temperature all day. Automatic washing machines can be operated during off-peak hours. This helps reduce energy costs and save money. The above steps will surely help you lower your electricity bills and save both valuable time and money.
Advice
- Wash your clothes in cold water, because more electricity is consumed with hot water.
- Make sure the electrical switches have no leakage.
- Keeping less hot water in the water heater uses less electricity.
- Clean your refrigerator coils regularly.
- Never preheat the oven unless required.
- Motion sensors can be installed to ensure that the lights come on, only when needed.
- If you are willing to spend the money, buy solar panels. They could help in the long run.
