Ever wanted to do something fun in Garry's Mod? Well, with this article you will learn how to make a car - read on!
Steps
Step 1. Go to 'Useful Construction Props' and find one of those big red freight containers
Step 2. Use the wheel tool and set it so that 0 is forward and 5 backward, as this will be easier to understand
Step 3. Place the four wheels in the container and make sure they are level
Go to each wheel and press 'e' to change its direction, so that they all go forward.
Step 4. Freeze the container and weld a capsule into the flat front of the machine
Step 5. Put 4 thrusters on the left side and set the thrust to 6 and the pull to 4, so that the car can spin
Advice
- When putting on the wheels, the torque will need to be high.
- When you put the thrusters on, place them halfway.
- If you want your car to go faster, put more thrusters in the rear of the car and set the thrust much stronger than the traction - something like 5 to 0.
- Make sure you fit the exact wheel model!
Warnings
- If the car doesn't move, you may have forgotten to defrost it.
- Make sure all wheels are moving forward.