To be able to modify the software installed on your iPod or iPhone, including jailbreaking, you will need to activate the 'Recovery' mode of the device. The steps to follow are simple, find out by continuing to read.
Steps
Step 1. Disconnect the device from your computer
Otherwise, if you start with the device already connected to the computer, the process will not work. Leave one end of the USB cable connected to the computer, as the device will subsequently need to be reconnected to the PC.
Step 2. Turn off the device
Press and hold the power button. As soon as the slide off switch appears, slide it to the right. Wait for the shutdown procedure to finish before continuing.
Step 3. While holding the 'Home' button, connect your device to your computer
This will cause your device to turn on.
If the icon indicating a low battery level appears, recharge the device for a few minutes, then repeat the procedure
Step 4. Continue holding the 'Home' button
After a few moments, the iTunes connection icon will appear on the screen. An arrow will point in the direction of the iTunes logo from a USB cable. At this point, you can release the 'Home' button.
Step 5. Launch iTunes
If you want to restore your device using iTunes, launch the program. iTunes will display a message warning you that it has detected a device in 'Recovery' mode. You can restore your device from an existing backup.
Step 6. Exit 'Recovery' mode
To do this, you simply need to hold down the 'Home' button and the power button for about 10 seconds. This way your device will shut down. You can turn it back on normally by pressing the power button.
Warnings
- wikiHow and the authors of this article are not responsible for any damage to your device.
- Jailbreaking your iPod can be considered an Apple copyright infringement. Furthermore, this procedure will void the warranty of your device.
