Experienced sailors know the importance of tying the boat to the dock (in seafaring terms to moor) when it is not in use. If the boat is left unattended and unattended, it could continually move back and forth with the waves, scratching or damaging itself with the constant rubbing against the dock, other boats and objects in the water. Also, depending on the currents and storm surges, the boat could be carried adrift. Mooring a boat can be a difficult task for a captain, because he must take into account the position of the other boats and the wind before attempting to approach the dock. Therefore, since it is not an easy task, it is important to know the right techniques and protect your investment at the same time.
Steps
Step 1. Study methods for mooring the boat
It is important to be prepared with the right knowledge of what it means to moor before giving it a try.
Step 2. Prepare the correct rope (line) and use a stern rope to secure the rear of the boat, side springs to control forward-to-bow movement, and stringers to hold the boat close to the fenders
You also need to use the correct knots depending on the bollards on the pier.
Step 3. Decelerate as you approach the dock
Step 4. Determine the position of the other boats to avoid mooring too close to them
Step 5. Choose the dock area that allows you plenty of room to maneuver your boat
Step 6. Check the wind and the current of the water to make sure you are not being pushed off course as you prepare for mooring
Step 7. Navigate slowly to your location
Step 8. Turn off the engine and start the actual mooring phases based on your boat type and dock
Step 9. Tie each line with secure knots both at the end of the boat and the bollards
Step 10. Work as fast as possible to avoid any damage to the boat that could be caused by hitting the dock
Advice
- If you doubt the safety of the rope you are tying, tie a double knot.
- If possible, get help from several crew members or some friends to tie up the boat quickly and efficiently avoiding problems.
- Rope or rope is the common name, however you should know that when you are aboard a boat, these components are referred to as "rope".
- If you know the area or pier where you will moor your boat, call ahead to find out exactly what awaits you and what type of line is best to use to secure the boat.
Warnings
- Don't just use a line to moor your boat if the waters are rough or the currents are strong. If you use more lines fixed to different areas of the boat you will be safer.
- Do not approach the dock at a high speed.
- Never use thin or weak ropes to tie the boat to the dock. They could break and cause damage to the boat.
