How to build a wooden and plastic swimming pool

Table of contents:

How to build a wooden and plastic swimming pool
How to build a wooden and plastic swimming pool
Anonim

You will need a quantity of pieces of wood with a 5x10 cm section, at least 8, as long as you want one side of the pool to be, and a quantity of others for the scaffolding; at least 20 supports will be needed depending on the height of the pool.

Steps

Build a Swimming Pool from Wood and Plastic Step 1
Build a Swimming Pool from Wood and Plastic Step 1

Step 1. Build pool side braces by placing two pool length pieces of wood on the floor

Decide what length you want the pool to be, then cut the wood to that length without the 5x10cm width.

Build a Swimming Pool from Wood and Plastic Step 2
Build a Swimming Pool from Wood and Plastic Step 2

Step 2. Screw the pieces to the wood at a distance of a minimum of 30 to a maximum of 60 cm

Build a Swimming Pool from Wood and Plastic Step 3
Build a Swimming Pool from Wood and Plastic Step 3

Step 3. Repeat steps 1 and 2 until you have 4 supports like this

Build a Swimming Pool from Wood and Plastic Step 4
Build a Swimming Pool from Wood and Plastic Step 4

Step 4. Cut 4 pieces of plywood to the height and length of the supports

Attach them to the front of the scaffold.

Build a Swimming Pool from Wood and Plastic Step 5
Build a Swimming Pool from Wood and Plastic Step 5

Step 5. Now you need to build the side scaffold to keep the water inside

You can draw both scaffolding or use this template. Build a 5 x 10 cm box at the height of the pool with another 5 x 10 cm piece inside, placed diagonally. Try to make sure the wood inside goes from the top of the pool to the ground, to the bottom of the base.

Build a Swimming Pool from Wood and Plastic Step 6
Build a Swimming Pool from Wood and Plastic Step 6

Step 6. Build at least 4 on each side, and attach them to the 5x10cm inside the wall scaffold

Build a Swimming Pool from Wood and Plastic Step 7
Build a Swimming Pool from Wood and Plastic Step 7

Step 7. Attach the walls together by putting them together in pairs and screwing the sides together, or you can place a log on the corners and connect the walls through it

The first method is the easiest and the simplest, you just need long screws.

Build a Swimming Pool from Wood and Plastic Step 8
Build a Swimming Pool from Wood and Plastic Step 8

Step 8. Screw the pool walls to the floor from the brackets and the pool walls themselves, using many, many, many screws

Build a Concrete Pool Step 4
Build a Concrete Pool Step 4

Step 9. Place the liner within the pool walls you connected, then screw 2.5x10 or 2.5x7.5cm screws onto the top of the pool walls to secure the plastic

Build a Swimming Pool from Wood and Plastic Step 9
Build a Swimming Pool from Wood and Plastic Step 9

Step 10. Fill the pool with water

Build a Swimming Pool from Wood and Plastic Step 10
Build a Swimming Pool from Wood and Plastic Step 10

Step 11. Finished

Advice

  • You don't need to use a pump to fill the pool, but it would help keep it clean.
  • You can line the pool floor with the plywood to try to help, but it's not necessary.
  • If you don't put chemicals in the pool or use the recent UV method, then the pool will become disgusting in a few days at most, maybe (at least) one day only.

Warnings

  • If water leaks, you will have to clean it up or the floor may warp depending on the extent of the phenomenon.
  • The deeper the pool, the greater the water pressure will press on the sides of the pool - be prepared for a catastrophic event on the walls.

Recommended: