How to Remove the Wheel Bearings of a Skateboard

Table of contents:

How to Remove the Wheel Bearings of a Skateboard
How to Remove the Wheel Bearings of a Skateboard
Anonim

If you are a 'skater' who does not want to get his hands dirty in setting up his 'bike', for example by removing the wheel bearings, dirty or worn, using a screwdriver, this tutorial is for you. This guide shows an effective and alternative way to disassemble the bearings of your skate.

Steps

Get the Bearings out of Skateboard Wheels Step 1
Get the Bearings out of Skateboard Wheels Step 1

Step 1. Unscrew the bolt securing the wheels to the skateboard axle, so that they can be removed

The secret is to use the axle of the skate to remove the bearings from the four wheels.

Get the Bearings out of Skateboard Wheels Step 2
Get the Bearings out of Skateboard Wheels Step 2

Step 2. Grab a wheel and place it on the threaded tip of the axle, so that the metal tip is placed exactly in the space between the two bearings located inside the wheel

Get the Bearings out of Skateboard Wheels Step 3
Get the Bearings out of Skateboard Wheels Step 3

Step 3. Hold the wheel so that the axle is positioned diagonally, within the space between the two bearings

Get the Bearings out of Skateboard Wheels Step 4
Get the Bearings out of Skateboard Wheels Step 4

Step 4. Pry the wheel as you rotate it 45 degrees outward

Get the Bearings out of Skateboard Wheels Step 5
Get the Bearings out of Skateboard Wheels Step 5

Step 5. If you complete the previous step correctly, the bearing located on the inside of the wheel will gradually be pushed outwards until it is completely removed

Recommended: