How to Build a Circular Fence (with Pictures)

Table of contents:

How to Build a Circular Fence (with Pictures)
How to Build a Circular Fence (with Pictures)
Anonim

Building a circular fence can help you become a more efficient horse trainer. The circular shape of the enclosure ensures a safer environment and prevents the possibility of horses running away. The circular fences can be built with wooden or metal posts and have a circumference of 15 to 24 m.

Steps

Build a Round Pen Step 1
Build a Round Pen Step 1

Step 1. Determine the size of your enclosure

A 15m pen is fine for training a lead horse, but if you plan to mount your horse inside the pen, a girth of 18 to 24m is recommended.

Build a Round Pen Step 2
Build a Round Pen Step 2

Step 2. Find a location for the enclosure

You will need a level area that is not humid.

Build a Round Pen Step 3
Build a Round Pen Step 3

Step 3. Measure the area where you intend to build the fence

Start in the center and use a tape measure to create a perfect circle. You need to be precise and leave enough space for the gate.

Build a Round Pen Step 4
Build a Round Pen Step 4

Step 4. Add soft soil to the area where you intend to build

Build a Round Pen Step 5
Build a Round Pen Step 5

Step 5. Start by adding a layer of gravel

Spread it out with a shovel or rake.

Build a Round Pen Step 6
Build a Round Pen Step 6

Step 6. Spread a layer of sand or plastic chipboard over the gravel using a rake

Build a Round Pen Step 7
Build a Round Pen Step 7

Step 7. Decide what material to use to build the fence

Livestock holding panels are movable and easy to assemble. Wood costs less, but requires more work and, once installed, is difficult to move.

Build a Round Pen Step 8
Build a Round Pen Step 8

Step 8. Determine how many panels or boards you will need to build the fence

  • Multiply the fence width by 3.14 to get the circumference.
  • Divide this number by the size of the panels. For example, if you are using 3m panels to build the fence, divide the circumference by 3.
Build a Round Pen Step 9
Build a Round Pen Step 9

Step 9. Mount the gate

It must be large enough for the horse to pass.

  • Measure the width of the gate and dig 2 holes about 1m deep with an auger.
  • Insert the 10 x 10 cm poles on which to mount the gate into the holes. Mount the gate.
Build a Round Pen Step 10
Build a Round Pen Step 10

Step 10. Move the panels to where you need them, laying them down so that the inner and outer hinges are aligned

Build a Round Pen Step 11
Build a Round Pen Step 11

Step 11. Raise two panels, side by side, overlapping the hinges

Build a Round Pen Step 12
Build a Round Pen Step 12

Step 12. Insert the panel pin between the hinges to connect them

Continue until all panels are mounted.

Build a Round Pen Step 13
Build a Round Pen Step 13

Step 13. Insert steel posts between the hinges of each panel with a power hammer

Building a circular fence properly requires extra support.

Build a Round Pen Step 14
Build a Round Pen Step 14

Step 14. Secure the panels with 0.8mm wire

Tighten it around the panels with pliers, tying it to the posts.

Part 1 of 1: Building a Circular Fence with Wood

Build a Round Pen Step 15
Build a Round Pen Step 15

Step 1. Dig holes with an auger, at least about 60 cm deep, depending on the length of the boards

Build a Round Pen Step 16
Build a Round Pen Step 16

Step 2. Place the base of the wooden posts in the ditches, perpendicular to the ground; fill the holes with earth

Build a Round Pen Step 17
Build a Round Pen Step 17

Step 3. Screw or nail the fence to the posts

For a circular fence, a fence between 1 and 2 meters high is fine.

Advice

  • Buying a ready-made gate, complete with everything needed to mount it, is the simplest solution.
  • Check the condition of the panels and posts at least once a year to make sure the fence is stable and secure.

Recommended: