How To Clean Your Driveway: 9 Steps

Table of contents:

How To Clean Your Driveway: 9 Steps
How To Clean Your Driveway: 9 Steps
Anonim

Would you like to be able to wash your driveway in a durable way? The trick is to use bleach before and after washing with the pressure washer. Let's see together the steps to follow.

Steps

Clean a Driveway Step 1
Clean a Driveway Step 1

Step 1. Get ready to completely clean your driveway

Clean a Driveway Step 2
Clean a Driveway Step 2

Step 2. Prepare the pressure washer

Make sure it has a chemical injector.

Clean a Driveway Step 3
Clean a Driveway Step 3

Step 3. Very carefully mix the cleaning solution

Wear protective goggles and gloves. In the container of the chemical injector, pour the bleach and a few drops of soap for each liter of product used.

Clean a Driveway Step 4
Clean a Driveway Step 4

Step 4. Wash your driveway using the pressure washer and bleach solution

Thanks to the chemical injector it will be automatically mixed with high pressure water.

Clean a Driveway Step 5
Clean a Driveway Step 5

Step 5. Let the chemical solution sit on the driveway surface for at least 10 minutes

If possible, wait for a longer time.

Clean a Driveway Step 6
Clean a Driveway Step 6

Step 6. If you have one, install the specific pressure washer accessory for cleaning surfaces

Otherwise, use the standard lance with an inclination of 15-25 degrees with respect to the surface to be cleaned.

Clean a Driveway Step 7
Clean a Driveway Step 7

Step 7. When scrubbing is complete, rinse any grime from the concrete surface of the driveway

Clean a Driveway Step 8
Clean a Driveway Step 8

Step 8. When the rinse is complete, perform a full wash again using the bleach solution

Again, leave it on for at least 10 minutes. At the end you can decide to rinse again or let the area air dry.

Clean a Driveway Step 9
Clean a Driveway Step 9

Step 9. Finished

Not only is your driveway sparkling clean, it will also stay clean for a long time!

Recommended:

How to Seal Your Driveway: 10 Steps (with Pictures)

How to Seal Your Driveway: 10 Steps (with Pictures)

Weather phenomena can be aggressive on asphalt driveways. Erosion due to wind and rain can cause cracks on the surface, which then turn into large cracks; eventually, holes form that damage the car or cause accidents. The best solution to this problem is prevention by applying a sealant.

How to Build a Concrete Driveway

How to Build a Concrete Driveway

Concrete driveways are permanent add-ons to your home that require little maintenance, can improve its appearance, provide kids with a safe place to ride the moped, reduce erosion, and keep your car clean more easily. Building one is an expensive and labor-intensive project, but for diehard do-it-yourselfers, building a driveway can be a daunting but very rewarding undertaking.

3 Ways to Remove Oil from a Driveway

3 Ways to Remove Oil from a Driveway

If your driveway is smeared with oil, there are several ways to get rid of the stains. You can try detergents, such as baking soda or dish soap and warm water, to scrub small stains with a steel brush. If you have to deal with very large dirty areas, it is worth buying a specific degreaser at the hardware store and a brush with steel bristles, to remove the oil that has penetrated into the concrete.

How to Paving a Brick Driveway: 15 Steps

How to Paving a Brick Driveway: 15 Steps

Brick walkways enhance the look of the house they are installed in. They integrate into the landscape and require little maintenance. The main reason for using them, however, is the possibility of self-building them with the help of some professional.

How to Build a Gravel Driveway (with Pictures)

How to Build a Gravel Driveway (with Pictures)

A gravel driveway is an element that beautifies the home without being overly expensive. It also has a longer life than asphalted ones and is more environmentally friendly. Snow and rain are absorbed by the ground below the gravel, avoiding water stagnation and minimizing the risk of flooding.