Whether it's for Carnival, a play, a musical or a certain fondness for green, such a shade is difficult to obtain and maintain. However, it must be said that with the right preparation and attention to detail, you will soon be able to show off a green hair that will surely make everyone turn on the street. At that point you will simply have to make sure that the color stays bright for as long as possible.
Steps
Part 1 of 3: Preparation
Step 1. Wear clothes that you can easily stain
During the bleaching and dyeing process, clothes get dirty. Consequently, when doing these operations, you should only wear clothes that you don't mind ruining.
If you don't have suitable clothing, you can use a suitable cape to protect yourself if the dye splatters or drips. However, even this solution does not guarantee that the product does not end up on clothes
Step 2. Analyze your natural color
If it is dark, the discoloration must first be done. If you are natural blonde, you can apply the dye directly and get good results. On the other hand, if you have dyed hair, for example a strawberry blonde, this will affect the final effect.
- It may be helpful to use a color wheel to better determine which result you will get based on the starting color. You can easily find it on the internet by typing "hair color wheel".
- If you have brown, red or dark blonde hair, you will need to bleach it before dyeing it.
Step 3. If necessary, bleach the hair
The bleach is a harsh chemical. If used incorrectly, it can severely damage the hair. Consequently, you may want to consult a hairdresser or an experienced friend / relative.
- The bleach should be prepared and applied according to the instructions. In general, you need to mix powder and water in a bottle or bowl, and then apply it directly to the hair by dosing it from the container or using a brush.
- Do not wash your hair before bleaching it. The sebum produced by the scalp helps protect them from the aggressive action of the bleach. To do this, you may want to soak them in coconut oil the night before.
- Before you try to bleach them, it's best to avoid shampooing for five to seven days.
- The dye can also be aggressive on the hair. If you have recently dyed them, it is better to wait one to three months before bleaching them, in order to avoid damaging them.
- If you have a lot of hair or it's particularly thick, buy two packs of bleach. That way, if you get caught in the middle of the procedure, you'll have more at your disposal.
Step 4. If applicable, leave the bleach on
The longer you let it work, the more effective it will be, but it will also be more harmful. You should always follow the instructions on the packaging in order to get a good result. In general, light hair bleaches in 15 minutes, while darker tones in 30 minutes or after several applications.
In most cases it is recommended to cover the head with a shower cap to leave the bleach on. This way the hair will soak well, resulting in a uniform final color
Step 5. Rinse off the bleach
To best protect your hair and get rid of the bleach, use a shampoo that neutralizes the pH during washing. Rinse them well with cold water, as the bleach that remains on your head will continue to lighten and damage them.
- Rinsing with cold water will prevent further damage to the hair, already damaged by the chemical treatment.
- The darker the hair, the more times the bleaching must be performed to lighten it adequately and obtain a good final color. You should wait about two weeks between bleaching.
Part 2 of 3: Dyeing
Step 1. Prepare the tint
Just as there are different types of dyes, there are different methods of preparation. To get a bright green, you should opt for an all green tint. Follow the instructions on the package for best results. Generally the preparation must be done using the bowl found in the product box.
- If you didn't find any bowl in the box, a plastic bowl or other container will do the trick. Just keep in mind that the dye may permanently stain it, so use one that you can smudge with no problem.
- To change the tone of the tint, you could mix two different colors: blue and green. The more blue you add, the more the intensity of the green will be softened.
- Prepare the dye carefully, whether it's a single color or two. If you do not do the preparation correctly, you risk finding yourself with an uneven result.
Step 2. Apply the tint
Each product has specific application instructions, so you should follow them to get a good result. In most cases, the hair should be divided into several parts to ensure even application. The color should be applied with a special applicator.
- If the dye is being applied by another person, ask them to massage the product into their hair to make sure it is well impregnated and that the result is homogeneous.
- The person performing the application should wear latex, rubber or vinyl gloves during the procedure. Sometimes the spots take several days to go away from the skin.
- To prevent the dye from staining the skin at the hairline or ear area, apply petroleum jelly or lip balm. This will make it easier to remove.
Step 3. Wait for the tint to take effect
The wait can last 30 minutes or several hours, it all depends on the product used. Most dyes have a more intense effect when left on for longer, but try not to wait too long. The chemicals could damage the hair.
Step 4. Rinse the dye following the instructions, which often suggest using cold water and conditioner
In many cases, using shampoo, especially when the dye is still fresh, can remove pigments from the hair. Be careful, as rinsing can cause paint to splash and stain surrounding surfaces.
Use an old towel or towel that you can easily get dirty. Dye residue will likely stain the towel as it dries
Step 5. Evaluate the new color
If this is your first time dyeing your hair, the result may not be the best, and at worst it could be a real disaster. You will have to wait a while before you can do another treatment, but another bleaching will remove the poorly done color, and then repeating the dye will allow you to obtain the desired shade.
- To avoid damaging your hair by frequently exposing it to chemicals, you should wait at least two weeks before bleaching it. For the color, you should wait at least a month.
- Everyone has different hair, and some hair types resist chemical treatments better than others. If you don't know if yours are ready to be treated again, consult a professional.
Part 3 of 3: Maintain the Tint
Step 1. Don't use heat
A hairdryer and hot water can remove pigments from your hair, making the dye look faded or dull. If you live in a warm and sunny area, you should also protect them from the sun with a hat, otherwise you risk making them lighten.
Step 2. Wash your hair as little as possible
Even permanent dyes don't last forever. Sooner or later the color will fade, although with green it is possible that there will always be shades left, unless you make a cut. Infrequent washing will protect the color and make it last longer.
- You should also avoid chlorine. This chemical can sometimes alter color shades or cause it to fade right away.
- You can keep your hair clean with dry shampoo, in this way you will avoid the exhausting effect of the water.
- When shampooing, you should use cold water to avoid fading the dye as much as possible.
- You may also want to switch to a shampoo formulated for dyed hair. You can find it without problems in the supermarket or perfumery.
Step 3. Make regular adjustments
To always have a fresh color, use the dye you have left over to touch up every two to four weeks. In some cases, you can mix a little dye with the conditioner to brighten it up without repeating the entire process.
Touching up the color with conditioner and dye leftovers is ideal when it comes to intense and brilliant pigments. Pastel colors usually do not allow for a noticeable effect with this method
Advice
It is helpful to ask a friend, relative, or other person to help you dye your hair. If you try it alone, you risk neglecting some spots or making an uneven application
Warnings
- Avoid contact with eyes, nose or mouth.
- Prevent the bleach from dripping onto your neck or ears. Many types of green tints cause a mild burning sensation on the skin.
