The concealer is a must-have product in any self-respecting makeup collection. In fact, it can brighten a dull complexion and cover blemishes such as sun spots, pimples and dark circles. This article will teach you how to use it like a real make-up artist, so that you have an even and radiant complexion.
Steps
Step 1. Choose the corrector that's right for you
They come in different shapes and colors, so before buying one, analyze the leather. Are you planning to cover up pimples, dark circles, scars or birthmarks? If you have discoloration, buy a green or yellow one; this type of concealer evens out the parts of the epidermis that are red or darkened. For scars and dark circles, use a concealer one or two shades lighter than your natural skin tone.
- Use an acne concealer pen - it has a pointed end that makes it easy to apply to spots and pimples.
- Test your face (not your hands) to see if the concealer shade suits your complexion. Make sure you try with your make-up removed.
Step 2. Prepare the skin
Before applying the concealer, wash your face with a mild cleanser and apply a moisturizer. Use make-up remover and a cotton swab to remove dark under-eye spots caused by mascara (sometimes some residue may remain even though you removed your make-up well the night before). The concealer is the first product to use for make-up and you can apply it without problems on a clean face.
Step 3. Correct dark circles
Use a concealer brush (it's more hygienic) or your ring finger to dab it under your eyes. Start at the inner corner of your eye and work your way up to the opposite corner, where the lashes end. Blend the product around the ends to avoid a noticeable gap between the complexion and the concealer.
- Never rub the concealer around the eyes: the skin in this area is extremely delicate. Just dab it with your ring finger or a brush to apply and blend it.
- Work the concealer up to the bridge of your nose if you have sunken eyes. It is an area that is often overlooked when applying this product, but don't do it, otherwise you will have a sleepy air.
- Make sure you apply the concealer up to the lash line, directly under the inner rim of the eye.
Step 4. Apply concealer to cover pimples and blemishes
If you suffer from acne and have dark spots, sunspots, scars or birthmarks, use this product to remedy. Dab it on the surface of each mark and then blend it gently outwards. Spread only a veil to avoid the greasepaint effect; if necessary, you can always stratify it progressively.
- If you have acne, don't use your fingers to blend the concealer. Instead, use a clean brush. You will avoid shedding bacteria, which will make the situation worse.
- If you need to correct a large area (for example you suffer from rosacea), create a particularly thin layer and blend it carefully on the ends. The more concealer you apply, the more likely you are to notice over the course of the day because it will oxidize.
Step 5. Attach the corrector
After you have carefully covered and blended all the imperfections and dark circles, add a veil of foundation on the concealer. Use a loose or compacted powder to kill two birds with one stone. You can also use a cream or liquid base, but then you will have to apply the powder to set the makeup.
- Blend the foundation you applied to these areas well. Use a bright fixing powder and a special brush to make sure it stays in place for at least 12 hours.
- Use a small brush to reach the inner corners of the eyes and the lash line. Make sure to fix every single part of the face you applied the concealer to.
- Dab an extra layer of powder on the areas where you have applied the concealer to make sure it does not run off during the day.
Method 1 of 1: Complete the Base
Step 1. Put on foundation
After you have finished dabbing and blending the concealer on the imperfections, you need to move on to the application of the foundation. It can be liquid, cream, powder or to be applied with an airbrush. It allows you to even out the skin and prepare a perfect base for the rest of the makeup.
Step 2. Apply the bronzer
Making a good foundation with concealer and foundation allows you to even out your complexion, but it also eliminates natural shadows or tanned areas of the skin. Apply it in the hollow of the cheeks and to contour the nose as well as the perimeter of the face: this will allow you to give definition to the makeup.
Step 3. Apply the blush
Not everyone has naturally rosy cheeks, but when applying makeup, applying a touch of blush to your face allows for a fresh, healthy glow. Use this product to further define the face, otherwise the base will be too flat.
Step 4. Create light points
To add depth to your makeup, use a cream or powder highlighter along the top of the cheekbones, under the browbone and in the inner corner of the eye. In this way, you will highlight the face and fix the makeup in its entirety.
Step 5. Define your brows
After applying all these products, you may find that the eyebrows have been partially covered by the foundation, so they don't stand out and turn off I look at it. Define them to darken them naturally, drawing attention to the eyes and face shape.
Step 6. Finished
Step 7. Finished
Advice
- Remove your make-up completely before going to sleep. Leaving makeup on overnight will only dry out the skin, clog pores, and increase the likelihood of blemishes or other skin irritation.
- Larger stores, such as Sephora or MAC, offer make-up sessions with professionals in the sector. Take advantage of this service to learn how to value yourself.
- Make sure that the concealer fits perfectly to your complexion: if it is too dark, as the hours go by it will be evident that you have applied it. In fact, orange patches will form.
- If you find yourself battling dark circles on a regular basis, try to get some more sleep.
Warnings
- Use oil-free or non-comedogenic makeup to prevent blemishes and other skin irritations.
- If you have sensitive skin, use hypoallergenic beauty products.
